LDB-type jet pulse baghouse 6 
 LDB-type jet pulse bag filter is a new type of pulse jet bag filter. 
 The average small pulse jet bag filter bag length is generally not more than 2-2.5m, again as long as the cleaning effect, so when the processing amount of wind, covers an area larger. In order to increase the bag length, lower injection pressure, pulse jet bag filter up and down the injection characteristics, namely the upper and lower openings of the bag and use the injection air flow filter bag cleaning. 
 It works: the dusty gas from the tank above the enter the dust collector, bag filter, bag top-down flow to net gas header collection, and then discharged from the lower part of the exhaust port. Equipped with a header in the upper box and net gas injection tube. Cleaning, up and down the injection tube to the bag injection, each row of filter bag cleaning controlled by the pulse controller according to the order. 
 The collector has the advantage of a small footprint: Because this filter up and down on the spray cleaning methods, so the bag can be up to 5m long than the general pulse jet bag filter bag 2.5-3m. Therefore, in the same covers an area of ??the case, the filter area can increase by about 20% -50%. 2, the injection pressure is low: The collector uses a low-pressure injection system, the injection pressure by the general 500-700KPa, reduced to 200-400KPa, can be adapted to general factory compressed air pipe pressure. 3, the box structure is more reasonable: The collector uses a modular type 7 bag, every row and every five rows to form a unit. Such as when dealing with large amount of wind can be taken to the combination of multiple units in parallel.