LCPM64-512 sub-room-type side of the jet low pressure pulse bag filter 10 
 Structural features: 1) on the box, can set off a small access door; 2) in the box, including the flower plate, bag and cage bone rectangular induction tube, the air bag in the box to check the door, into the duct out of the duct; 3) under the cabinet and ash bucket, ash bucket check the door, screw conveyor drive motor, a gray, columns, etc.; 4) injection system, including electromagnetic pulse valve pulse controller; How it works: the dusty gas from the air inlet into the intake charge within, through the primary settlement, the coarse particles of dust and most of the dust in the role of the quality of primary sedimentation agent, the settlement to the ash hopper, screw conveyor and dumping of ash valve discharge of dust from the gray; another part of the smaller dust in the role of the induced draft fan, into the box and adsorption to the outer surface of the bag, clean air through the filter bag into the box and flowing through rectangular induction tube, brings together a charge of discharge in the wind box. With the continuous filtration mining, attached to the dust accumulated on the filter bag surface will continue to increase, the corresponding increases of the running resistance of the device. In order to ensure the normal operation of the system, through the cleaning process to reduce the resistance of the device.